Wednesday, October 13, 2010

10 Steps to Help Refrigerators Live Longer

Every summer there are countless refrigerators that die unexpectedly. This is often due to the increase in temperature and the associated humidity. The following are a few suggestions to help your appliance make it through the next summer heat wave.

1. Don't use as an air conditioner. You may laugh, but this is particularly common with the elderly. They often leave the refrigerator door open in the hope of cooling the room. Or they may stand in front of the refrigerator trying to get cool themselves. A chair left sitting in front of the refrigerator is a sure sign.

2. Don't overload defrost system. Keep containers of water or juice sealed. Open containers of liquid will increase the amount of moisture deposited onto the cooling coil. This will cause the compressor to run longer. Run times of 16 hours per day are normal for refrigerators. Extra moisture could easily increase this to 20 hours per day.

3. Turn off icemaker. Icemakers will produce a harvest every four to six hours. This is more ice than most families can consume. All the exposed ice cubes will stress the refrigerator in hot weather. Turn off the icemaker until more is required. Depending upon the size of ice bucket, you will probably only need to turn it on every few days.

Put new ice cubes into a sealed container rather than leaving exposed in the ice bucket.

Have even seen a customer turn off icemaker and cover the ice bucket with plastic wrap. They left the front of bucket open enough to grab cubes when needed. Customer claimed this idea made ice cubes last longer, and refrigerator run less.

4. Doors not sealing properly. Gaskets full of holes or cracks allow warm air to enter. Or gaskets that are not clean may not seal properly. Clean surfaces with light detergent and warm water.

To test the gaskets use a dollar bill. While holding dollar bill against cabinet close door so that gasket seals. Pull the dollar bill out. It should have a resistance to being pulled out from under gasket. Use this method to test full perimeter. Resistance felt should be uniform around whole gasket.

5. Door warped. When the refrigerator door closes it should seal along its full length. If it seals at one point, but not another, the door itself may be warping out of alignment. This will need to be corrected by a service company. Until they get there try closing the door firmly (close hard, but don't slam shut). This will often force door to realign temporarily.

6. Don't overload. A standard refrigerator can accept about 50 pounds of new food per day. If you are overloading the food may appear not to cool properly. For example: Why add a whole case of warm soda to a refrigerator on a hot day. Add only what is required for that day. Add extra beverages just before bedtime. The refrigerator will have all night to cool them down.

7. Don't overload door shelves. Modern refrigerators can have extremely large door shelves that are easily overloaded. Heavy items such as glass bottles or large soda containers should be moved inside. The weight may be pulling the door away from the cabinet. This can cause the gasket to stretch until small openings appear at the corners of the gasket. Warm air can enter.

8. Teach children refrigerator etiquette. Children are notorious for standing in front of the freezer door trying to decide which treat to take. Even a few minutes with the door open can cause the refrigerator stress. Every time it is opened the cold air will roll out. As it rolls out the warmer room air will enter the refrigerators interior. This warm air invasion forces the appliance to run longer trying to produce more cold air.

9. Don't block air circulation. Remove bags, brooms, trays, etc, from the space between outside of refrigerator and surrounding walls. Refrigerator must be allowed to circulate air around itself. Blocking the airflow will cause the compressor to overheat. An overheated compressor can quickly burn out. If refrigerator temperature suddenly becomes erratic suspect the compressor is overworking.

10. Keep level. If not level the cabinet can go out of square. This is particularly important with newer refrigerators because they have very little internal bracing. If not properly leveled the cabinet can start to lean. This will affect door alignment and closing.

Doing the above will certainly help your refrigerator make it through the heat. The last suggestion is to simply keep your fingers crossed. Because, if Mother Nature decides to send us the full strength of her heat wave that is all that may save your refrigerator from joining the others in the great landfill in the sky.




Copyright 2005 by Donald Grummett. All right reserved.

Donald Grummett is an appliance service manager in Ottawa, Canada. In the trade over 30 years as a technician, business owner, and technical trainer. Learn more invaluable information about your household appliances by visiting http://www.mgservices.ca

Thanks To : way to find more save about camera tripod and Lens Hdtv Lcd 42 can help you to find more best about l where to find more save about Garment Bag , steam mop and electric kettle find more save about Mascara and kodak easyshare way to find more best about george foreman grill, grill, indoor grill electric.

Sunday, October 10, 2010

Check Out Avanti 7.4 Cu. Ft. Glass Top Chest Freezer

Avanti 7.4 Cu. Ft. Glass Top Chest Freezer Review






Avanti 7.4 Cu. Ft. Glass Top Chest Freezer Overview


The Avanti 7.4 Cu. Ft. Chest Freezer with Flat Glass Top (model: CF208G) is manufactured to meet rigid safety standards and features easy to open sliding glass doors with a convenient security lock. The CF208G also has a Fast Freeze switch to unleash the maximum freezing power as quickly as possible. The see-through Curved Glass Top is a stylish way of display the wares inside or to simply keep an eye on supplies. The interior has an innovative Easy Clean surface and 3 removable storage baskets so you can customize the space to your storage needs. This powerful and roomy freezer is the perfect solution for retail and service applications and would serve well in both medical and laboratory conditions.Key features include: power indicator light; rolling wheels for easy movement; defrost drain; security lock; power indicator light; adjustable thermostat; manual defrost; and a 1-year manufacturer's warranty. The Avanti 7.4 cu. ft. Chest Freezer with Flat Glass Top CF208G brings style, space, and fast freezing power to any retail, laboratory, or home situation.


Available at Amazon Check Price Now!


Related Products



Customer Reviews












*** Product Information and Prices Stored: Oct 10, 2010 13:30:49

See Also : Hdtv Lcd 42 can help you to find more best about l way to find more save about camera tripod and Lens find more best about Camcorder where to find more best about lcd arm and lcd arm bracket here you can find more save about Hp Deskjet and Software coreldraw

Thursday, October 7, 2010

Steam Or Dry Iron

Ironing is a fundamental part of clothes care and unless there is a really good iron to smoothen away the creases, and wrinkles that washing machines invariably inflict on our clothes our attire will be very shoddy and ill kempt. It is best to opt for the steam irons that are now so popular in the market. For one thing it has proved to be very fast and effective. The steam takes care to smoothen out the smallest wrinkle and the result is perfectly pressed and neatly folded lines of clothing. Even the best clothes can be marred by bad ironing and wrong creases.

There is a small 1 litre or 0.5litres to 2.5litre water tank inside the iron which gets heated up and offers a spray of steam for effective ironing. The water tank is removable and can be cleaned at intervals. The steam can be turned on and off depending on the kind of fabric one is ironing. For example, the lighter fabrics do not require the spray of steam while the heavier fabrics require it for the crinkle free look. The iron is designed in a way to be drip free and safe. Depending on the kind of fabric that you are ironing you can set the heating option and the temperature is automatically set just right for the kind of fabric you are ironing. When the temperature reaches a suitable point it automatically switches off.

There is no fear of over heating and damaging the fabric or under heating and struggling to press. If the water takes 4 minutes to prepare steam then the iron is ready to work non stop for 40minutes. Depending on each brand and make, approximately 50 to70grams of heat is generated in a minute. The cord connecting the iron the power peg is as lengthy as 1.7 metres. There is an embedded sole plate to make the iron retain its heat for a longer period. Generally about 2000watts of power is utilized.

Some brands offer 5 different heating positions for the convenience of the user. It is important to ensure that the iron is scale free if the clothes have to retain their pristine quality. The new anti scale system ensures that the sole is kept scale free for the smooth movement of the iron. Some irons heat up very fast, even in 2minutes and this makes the power consumption much less.

There are some irons which have a self cleaning mechanism. Unless one prefers the heavier kinds, a good iron will weigh about 1.15kgs which will not be very burdensome for the user even if he or she has piles and piles of clothes to iron.




Find Ironing machine reviews on Tefal, Challenge and Philips Irons.

Recommend : way to find more save about camera tripod and Lens find more save about End Table and double boiler

Sunday, October 3, 2010

Highlights of Dometic Refrigerator Parts

Today the refrigerator is one of the most common appliances in every home. Other than this, you find them in hotels, offices, restaurants and gyms. It provides the perfect option to store food supplies for an entire group of people. You can get different sizes from room sized large refrigerators to cabinet sized refrigerators. Each is dependent on the parts it runs on.

Benefits of the Dometic Refrigerator Parts

Once you find out about the Dometic refrigerator parts, you can understand their importance. They are invaluable when it comes to maintaining the freshness and nutrition of food. There are many refrigerators which function on an industrial level. Each has different features and therefore requires different parts. The parts offer reliable and affordable options.

Different Dometic Refrigerator Parts

The refrigerator is created out of a compartment which has thermal insulation. It also has a heat pump which extracts the heat from the appliance into the external environment. Any problem here will hamper the performance of your refrigerator. Fortunately, you can find Dometic Refrigerator parts to avoid dealing with a problem. Each parts serves a specific function in the cooling system. Some of the most important parts include refrigerant, evaporator, and heat exchanging pipes.

Refrigerant

One of the most integral parts of the cooling system of the refrigerator is the refrigerant. With the change in temperature, it changes from a gaseous form to liquid form. Earlier fridge models utilized fluorocarbons which are known as CFC's. These are detrimental to the environment. Today you will find most of the refrigerants made out of ammonia.

Evaporator

This plays the function of evaporating and absorbing the heat from the appliance. It is achieved with the use of the liquid evaporating refrigerant.

Heat Exchanging Pipes

You can see different coils surrounding the refrigerator back. These are the heat exchange pipes, which are used to transport the refrigerant throughout the unit.

In addition to these, there are some other Dometic refrigerator parts as well. For instance, made out of heavy metal a compressor is used to compress the refrigerant. The pressure of this refrigerant is raised by the use of a powered motor.

The bottom line is that a refrigerator may ask you to replace a part any time. This is when you can trust Dometic refrigerator parts, not only for their durability and affordability but also for their variety.




Dometic refrigerator parts are known for their durability and affordability. If you're looking for high quality refrigerator parts then visit http://www.dometicrefrigeratorparts.org. With domestic refrigerator parts, you'll be assured of a functional product and money well spent.

Friends Link : Hdtv Lcd 42 can help you to find more best about l way to find more save about camera tripod and Lens way to find more save about corelle dinnerware and more dinnerware Welcome to Bluetooth Keyboard 10 blog Imac Cheap Today for love imac

Friday, October 1, 2010

Emerson 2-Door Compact Refrigerator




I had a mini fridge in my room for a year and it broke so I replaced it with this Emerson one. I love it, the Freezer gets very very very cold, as well does the refrigerator part. You can store lots of things in it, and it even has its own storage compartment for fruits and cold cuts!

The refrigerator works well. Freezer section is unusually large for a compact fridge. Two drawbacks. Fridge came without the keys included for the doors. Emerson took a while but eventually came through with the keys for me. Overall, it's a good compact fridge.

Emerson 2-Door Compact Refrigerator